Seidel Moki Motor Mount System
Sorry, currently out of stock
A vibration damping Engine Mount System for MOKI S 250 5-cylinder radial engine (complete build kit)
The Seidel Engine Mount System was developed to absorb the torque vibrations of the Seidel Props gear drive SP-250-X as well as have an all in one Moki Mount System for all Moki applications.
The mount was originally designed for the Airworld Seafury 1:4,5 with MOKI S 250 but can be used for every other plane as well. Make sure that the fuselages firewall diamater is equal or larger and make sure that you have room for the depth that the mount system adds.
The Seidel-Props Engine Mount System is a complex 3D structure made of the highest quality components.
Every shock absorbed by the Engine Mount System is kept away from the fuselage.
Very high rigidity in vertical and horizontal direction along the Engines axis.
Fine tuned elastic spring elements to avoid torque vibrations created by the engine.
Stiffness of springs can be tuned by adding or removing spacers.
Already included Thrust angle down and right is matched for Moki use on 0down/0side firewalls.
This mount has furthermore been designed to act as a crash structure in order to take some of the impact away from the motor should you have an accident.
Mounting the engine to the structure with 6 instead of 3 screws.
Simple carburetor adjustments due to the installed guide tubes which lead right to the carburetor needles. Custom long screwdriver included.
Servo mount for throttle and choke (standard size) on the back plate. Linkage and screws included.
You can mount the complete power plant to your test bench as well.
Prepared for using the original black top-hat style ignition or the new flat High-Voltage MOKI ignition.
All screws and washers included.
Thrust angle down: 1,75°
Side angle: 1,95°
Weight incl. all screws: 760 g
Diameter: 316mm / 24.4"
Height at center: 55mm